Shaper machine operating procedure manual template

Shaping Machine. DO NOT use this machine unless a teacher has instructed. you in its safe use and operation and has given permission. Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Appropriate footwear with substantial uppers must be worn. SAFETY OPERATING PROCEDURE Standard Operating Procedure (SOP) Lathe Stop the machine immediately if odd noise or excessive vibration occurs. Only properly sharpened drill bits and cutting tools in good condition should be used.

Dull drill bits and chipped or broken cutting tools must be removed from service. MILLING MACHINE OPERATIONS OD1644 LESSON 1TASK 1 NOTE For safety reasons, extreme caution should be exercised while using the rapid traverse controls. (5) Table. The table is the rectangular casting located on top of the saddle. It contains several T DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling manual for proper lubrication methods.

Clean each machine DRILLING MACHINE SAFETY Never make any adjustments while the machine is operating. Operating Instructions and Parts Manual Spindle Shaper 27 Super shown Models: 27 and 27Super Follow the grounding procedure indicated in the National Electrical Code. Eye safety. Before operating the machine, remove tie, rings, watch and other jewelry and roll up sleeves above the elbows. Remove all loose outer clothing and confine long a. General.

The lathe is a machine tool used principally for shaping articles of metal, wood, or other material. All lathes, except the vertical lathe provides a variety of rotating speeds and suitable manual and automatic controls for moving the cutting tool. b. Types of Lathes. LATHE OPERATIONS OD1645 LESSON 1TASK 1 and operating the unit. The manuals purpose is to familiarize you with the safe operation, basic function, and features of performing a certain operation or procedure, do not proceed until you can confirm, from or all information in this manual inapplicable to your machine.

Further, as Milling Machine. DO NOT use this machine unless a teacher has instructed. you in its safe use and operation and has given permission. Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Machine is damaged or not operating properly iii.

Power cords are damaged or plug is not properly grounded o Follow all safety warnings given in the OEMs Operating Manual. o RING TEST PROCEDURE Suspend abrasive disc as shown below: INSTRUCTIONS TO LEARN HOW TO USE A LATHE The lathe is a machine tool used principally for shaping pieces of metal (and sometimes wood or other materials) by causing the workpiece to be held and rotated by the lathe Know where the emergency stop is before operating the lathe.

A shaper is a type of machine tool that uses linear relative motion between the workpiece and a singlepoint cutting tool to machine a linear toolpath. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical. Grizzly Shaper Manual. Uploaded by joetylor. Related Interests. Mains Electricity; manual before operating this machine Using a template and a Shaper machine operating procedure manual template collar for pattern shaping.

Use care in designing and making fixtures. 7. Secure the workpiece (on the three sides that will not be cut) with toggle clamps. and the fixtures must be stable in operating the machine. Speci cation MDM MDM Table dimensions 66 x 12. 25 66 x 12. 25 This Shaper is designed to give you years of safe service. Read this owners Note: If you have any doubt about the described procedure, seek professional assistance.

Do not attempt any procedure that you feel is unsafe or 1. MACHINING OPERATIONS AND MACHINE TOOLS. 1. Turning and Related Operations. 2. Drilling and Related Operations. 3. Milling. 4. Machining& Turning Centers



Phone: (265) 111-4906 x 6210

Email: [email protected]