Luxomat pd3 1c manual transmission

Occupancy detector LUXOMAT PD31CSM, without remote control, with circular detection area, surface mounted and with 1 channel. Occupancy detector LUXOMAT PD31CFC Micro, without remote control, with additional microphone, circular detection area and with 1 channel. BEG Luxomat PD3N1CFC White Poycarbonate Single Channel Flush Recessed Ceiling Mounting 360 PIR Presence Detector 2300W IP23 230V Dia: 83mm x H: 81mm B.

E. G. LUXOMAT Presence dependent Light linked Time controlled For the future of our environment With B. E. G. energy saving cost reduction environmental protection B. E. G. LUXOMAT The pole caps are melting, sea levels are rising, freak Saving energy with B. E. G. also means cost reduction storms are getting worse and increasing in frequency all and environmental protection. as a Installation and Operating Instruction for B. E. G. Motion detectors PD32CFC Micro LUXOMAT PD32C Micro 2.

Installation of the LUXOMAT LUXOMAT PD3 connected in parallel to a manual override switch: Connect switch correctly 4. Unintended switching of light LUXOMAT PD3N1C Micro 1. Mounting preparations Work on the 230V mains supply Manual Switching You can switch the lighting on and off manually by pressing the pushbutton for a short time.

It will stay on or off as LUXOMAT PD3 is mounted too high: See table of mounting heights. LUXOMAT Occupancy and motion detectors PD91C1248VFC white Accessory Description Colour Manual, pdf ( 213 KB) EUDeclaration of Conformity, pdf ( 49 KB) Installation of the LUXOMAT PD31CSM PD31C connected in parallel to a manual override switch: Connect switch correctly 4.

Unintended switching of light Movement of heat source within detection area: Check on presence of animals, fans or heaters The detector must be installed on a Buy B. E. G. LUXOMAT Occupancy detector PD31CSMMicro the best price, fast worldwide shipping, up to 65 discount B. E. G. LUXOMAT B. E. G. LUXOMAT O. BEG Luxomat PD3N1C Remote controllable ceilingmounted in surfacemount and flush mounting versions with 360 circular detection area.

One channel to switch the lighting. Installation of the LUXOMAT PD3N1CFC The detector must be installed on a solid and level surface. There is no need for frames. LUXOMAT PD3 is mounted too high: See table of mounting heights. LUXOMAT PD3N connected in parallel to a manual override switch: LUXOMAT PD91CGHFC by covering the fresnellens. After expiry of delay timer, has to turn OFF lighting. LUXOMAT PD91CGHFC connected in parallel to a manual override switch: Connect switch correctly 4.

Unintended switching of light Movement of heat source within detection area: Installation and Operating Instruction for B. E. G. Occupancy detectors PD31CSMFCFM and PD32CFCFM LUXOMAT PD3 connected in parallel to a manual override switch: the PD31CSMFC is equipped with an additional knob (see pictures)



Phone: (694) 456-5100 x 4242

Email: [email protected]